How to Set Up SAP Cloud Connector

SAP Cloud Connector is used to setup a secure connection between your computer and SAP systems.

Here’s how to initialize SAP Cloud Connector, connect it to SAP Cloud Platform, and enable the access to your local SAP NetWeaver AS ABAP system from the cloud, as follows:

1. Access https://localhost:8443 or use the port you’ve defined. Use the predefined User Name “Administrator” and Password “manage” and then click Logon, as shown in the figure below.

figure_2-103.jpg?profile=RESIZE_710x

2. First you need to change the default password to a new one. You may also need to set a proxy to connect to the internet.

figure_2-104%20copy.jpg?profile=RESIZE_710x

3. Now you’ll connect SAP Cloud Connector to your SAP Cloud Platform trial account. Here you need to select Europe (Rot)-Trial for Region. Fill in your account name, which looks like “p<xxxxx>trial”, in the Subaccount field. Also enter your Account User (pxxxxx) and Password. Then click Save to save this configuration.

figure_2-105%20copy.jpg?profile=RESIZE_710x

4. Below shows the status when you’ve connected to SAP Cloud Platform. You’ll see a green success message.

figure_2-106%20copy.jpg?profile=RESIZE_710x

5. Click Cloud To On-Premise in the left menu, then click the Add button on the right side.

figure_2-107%20copy.jpg?profile=RESIZE_710x

6. Choose SAP Gateway as the Backend Type, then click Next.

figure_2-108%20copy.jpg?profile=RESIZE_710x

7. Choose HTTPS as the Protocol, then click Next.

figure_2-109%20copy.jpg?profile=RESIZE_710x

8. For Internal Host, enter “vhcalnplci.dummy.nodomain”, and enter “44300” for Internal Port. Then click Next.

figure_2-110%20copy.jpg?profile=RESIZE_710x

9. Change Virtual Host to “npl”, then click Next.

Note: The purpose of the virtual host is to hide your real address in the cloud. The virtual host and virtual port are only things you can see in the cloud.

figure_2-111%20copy.jpg?profile=RESIZE_710x

10. Select None for Principal Type, then click Next.

figure_2-112%20copy.jpg?profile=RESIZE_710x

11. Optionally, add a Description. Click Next.

figure_2-113%20copy.jpg?profile=RESIZE_710x

12. Check the checkbox for Check Internal Host, then click Finish, as shown below. This option will test if your SAP NetWeaver AS ABAP service is accessible from your computer.

figure_2-114%20copy.jpg?profile=RESIZE_710x

13. You should now see a row in the first table Reachable listed in green under the Check Result column. Click the Plus button in the lower table.

figure_2-115%20copy.jpg?profile=RESIZE_710x

14. In the Add Resource pop-up, enter “/sap” for URL Path, then select the Path and allsub-paths radio button for Access Policy. Then click Save.

figure_2-116%20copy.jpg?profile=RESIZE_710x

15. Below shows the final status of SAP Cloud Connector.

figure_2-117%20copy.jpg?profile=RESIZE_710x

By following these 15 steps, you’ll be able to set up SAP Cloud Connector, connect it to SAP Cloud Platform, and enable the access to your local SAP NetWeaver AS ABAP system. Pretty easy, right?

This content was originally posted on the SAP PRESS Blog and has been adapted from a section of the book SAP Fiori Launchpad: Development and Extensibility by Steve Guo. Used with permission of SAP PRESS. All rights reserved.

 

 

Votes: 0
E-mail me when people leave their comments –

I work for SAP PRESS, the world's leading SAP publisher.

You need to be a member of ERPcommunity.com to add comments!

Join ERPcommunity.com

MEMBERSHIP IS FREE!

Recent SAP Jobs




ERPcommunity.com is a 7LinksWeb.com project. You don't have to be big to be noticed.